What is this code *
Here are the numbers to dial on GSM or CDMA networks if you want to know if your phone is tapped: GSM networks. *#002# — Lists all call and data forwarding settings. ##002# — Clears all call and data forwarding settings.
What does code * 002 mean?
Here are the numbers to dial on GSM or CDMA networks if you want to know if your phone is tapped: GSM networks. *#002# — Lists all call and data forwarding settings. ##002# — Clears all call and data forwarding settings.
What is the code ##002 *# 21 and *# 62?
You can immediately check if your phone has been compromised, or if your calls, messages etc have been forwarded without your knowledge. All you need to do is dial a few USSD codes – ##002#, *#21#, and *#62# from your phone's dialer.
What is the use of this code * 61 *?
Code: *61*PhoneNumber# for call forwarding when you don't answer.
What is this code for * 21 *?
According to Gadget Mates, *#21# is a specific Unstructured Supplementary Service Data (USSD) code that is typically used to check the status of call forwarding on a mobile device. It allows users to view whether their calls are being forwarded and to which number. They are also called Interrogation codes.
What does *# 21 * mean?
*#21# – Displays call forwarding status. 233552 is the # you're sending this info to. 63. Kirn Gill II. Android user and developer.
What does this code mean *# 9900?
*#746# – Open the Debug dump menu. *#9900# – Access System dump mode.
What does *# 31 mean?
This code may be better known to some people to block caller ID on a per-call basis. Type #31# (or the more familiar *67) before you put in a person's 10-digit number. What you enter would look like #31#1234567890. This is a must on landlines where you can't turn off Caller ID without asking customer service.
What does code *# 0 * stand for?
*#0*# is to test some mobile functions to find out any hardware problem like screen colors, dim Light, tourch, vibration and receiver and some other functions it is for maintenance purposes if you wanna try this test make sure to know how to exist from a function to another some mobiles use volume up not for all …
What is ## 4636 or ## 197328640 ➡?
Location tracking check: Enter *#*#4636#*#* or *#*#197328640#*#* to see if your location is being tracked. Call redirection code: Dial *#62* to find out if your calls and messages are being redirected to another number. Hardware address check: Your Android phone has a unique hardware address called a MAC address.7 päivää sitten
What is * 401 * mobile number?
The Department of Telecom (DoT) has recently cautioned telecom subscribers against dialling *401# followed by an unfamiliar mobile number, as doing so may expose them to potential cyber fraud. “This activates unconditional call forwarding received on the mobile of citizens to the unknown mobile number.
What does * 64 do?
Selective Call Acceptance Screen incoming calls and only accept calls from certain numbers. Other callers will hear a message that you are not accepting calls at this time. To activate, dial *64.
What is ##002 used for?
Once you've established who your calls are being forwarded to, you can turn off all call forwarding. To do this, simply dial ##002#.
What is *# 35 *0000?
How to block every incoming call. Dial the following service code to block all incoming calls to your line: *35*0000#. To stop all incoming calls to your line from being blocked, use the service code #35*0000#.
Is *#62 safe?
Is it true that one can verify that his call is being traced or not by dialing *#62#? This is completely false. This USSD shortcode is to check whether you have call divert service enabled on your no. or not.
What is the 002 code?
##002# – If your voice call or data call, or SMS call has been forwarded, dialing this USSD code will erase them *#21# – By dialing this USSD code, you would get to know if your calls have been diverted somewhere else or not.
What is error code 002?
Error code 002 typically indicates that the satellite signal is not being received properly by your satellite dish.
What is error code 002 in SMS?
002 – Sending SMS expired in 6 hours The phone number format itself is correct but the message could not be delivered due to an unavailable network connection between the carrier and the handset. Possible causes: the handset was switched off. the handset was out of coverage area.
What does *97 do on a phone?
The next time you receive a call from a number you wish to block, end the call and dial *97. The number will automatically be added to your Selective Call Rejection list. You can block up to 100 numbers. To manage or modify your Selective Call Rejection list, dial *60 and follow the prompts.
Does *# 0 *# work?
It is a shortcut to get to the service menu in Samsung phones , dialing ‘*#0#' takes you to a menu to check and confirm that most of your hardware components are working properly or not .
What is 4636 secret code?
The * * 4636 * * Code in phone is a secret code that helps unlock the hidden menu in an Android phone. It technically acts as a diagnostic tool that helps you to check various details on your phone like IMEI number, data consumption on cellular mode and Wi-Fi.
What is *# 31 code?
Block outgoing caller ID for all future calls by dialing: *31# When blocking outgoing caller ID by default, you can enable it “per call” by prefixing *31# to a number (ie: *31#xxxyyyzzzz )
What does *# 7353 do?
*#7353#: This code opens the Quick test menu. This allows for a quick way to test certain aspects of your Android.
What does *82 do to your phone?
To deactivate Caller ID Blocking for a specific number: Enter *82. Enter the number.
What does *3370 do on iPhone?
What Does *3370# Do? According to the email, the secret *3370# code is supposed to improve your phone's battery life. So, if you ever find yourself with very low battery and without a charger at hand, simply press the *3370# keys to activate the secret battery reserve.
What does * 61 *# mean?
*61# activates call forwarding when there's no reply. The “different number”/”random number” might be a voicemail number. If there's no reply, the call's taken to voicemail. *#21# should not have turned it off.